Metrohm tiamo 2.4 Manual - Manual (Page 361)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
tiamo 2.4
￭￭￭￭￭￭￭￭ 345
NOTE
Calibration curves cannot be printed out directly from the dialog win-
dow Calibration curve/Calibration data. Instead you should use a
report with a report template which contains the fixed report (see
Chapter 4.4.1.4.3.13, page 248).
4.5.2.17 Determinations - Control chart
Dialog window: Database ▶ Determinations ▶ Control chart… ▶ Control chart
With the menu item Determinations, Control chart... or the symbol
the dialog window Control chart - 'Template name' opens in which a
control chart is shown for the selected determinations containing statisti-
cal evaluation (mean value, number of determinations, absolute and rela-
tive standard deviation) according to the loaded template.
Template
Selection Default | 'Template name'
Default value Default
Default
Selection of the saved templates for control charts (see Chapter
4.4.2.2.1, page 250). When the dialog window is opened, the last
template to have been loaded will be shown. If a new template is
selected then the display will be updated automatically.
[Templates]
Open the dialog window Templates for control charts .
Graphic presentation
Shows the measured values together with warning and intervention limits
and statistical values according to the settings on the selected control
chart. If the cursor is moved to a point then the number, date and value
appear as a tooltip. The sorting and the date and time for the first and last
point are shown as the legend.
[Print (PDF)]
Open the dialog window Print control chart (PDF) (see Chapter
4.5.2.20, page 347). The content of the control chart can be shown as a
PDF file in the required format.