Show ipv6 access- list, Show ipv6 access-list, Show ipv6 access-list (984) – LevelOne GTL-2691 User Manual
Page 984
C
HAPTER
30
| Access Control Lists
IPv6 ACLs
– 984 –
E
XAMPLE
This example accepts any incoming packets if the destination address is
2009:DB9:2229::79/8.
Console(config-ext-ipv6-acl)#permit 2009:DB9:2229::79/8
Console(config-ext-ipv6-acl)#
This allows packets to any destination address when the DSCP value is 5.
Console(config-ext-ipv6-acl)#permit any dscp 5
Console(config-ext-ipv6-acl)#
This allows any packets sent to the destination 2009:DB9:2229::79/48
when the flow label is 43.”
Console(config-ext-ipv6-acl)#permit 2009:DB9:2229::79/48 flow-label 43
Console(config-ext-ipv6-acl)#
This allows any packets sent to the destination 2009:DB9:2229::79/48
when the next header is 43.”
Console(config-ext-ipv6-acl)#permit 2009:DB9:2229::79/48 next-header 43
Console(config-ext-ipv6-acl)#
R
ELATED
C
OMMANDS
show ipv6 access-
list
This command displays the rules for configured IPv6 ACLs.
S
YNTAX
show ipv6 access-list {standard | extended} [acl-name]
standard – Specifies a standard IPv6 ACL.
extended – Specifies an extended IPv6 ACL.
acl-name – Name of the ACL. (Maximum length: 16 characters)
C
OMMAND
M
ODE
Privileged Exec
E
XAMPLE
Console#show ipv6 access-list standard
IPv6 standard access-list david:
permit host 2009:DB9:2229::79