LevelOne GTL-2691 User Manual
Page 368
C
HAPTER
13
| Security Measures
Access Control Lists
– 368 –
◆
Source/Destination IP Subnet Mask – Subnet mask for source or
destination address. (See the description for Subnet Mask on
◆
Source/Destination MAC Address Type – Use “Any” to include all
possible addresses, “Host” to indicate a specific MAC address, or “MAC”
to specify an address range with the Address and Mask fields.
(Options: Any, Host, MAC; Default: Any)
◆
Source/Destination MAC Address – Source or destination MAC
address.
◆
Source/Destination MAC Bit Mask – Hexadecimal mask for source
or destination MAC address.
◆
Log – Logs a packet when it matches the access control entry.
W
EB
I
NTERFACE
To add rules to an ARP ACL:
1.
Click Security, ACL.
2.
Select Configure ACL from the Step list.
3.
Select Add Rule from the Action list.
4.
Select ARP from the Type list.
5.
Select the name of an ACL from the Name list.
6.
Specify the action (i.e., Permit or Deny).
7.
Select the packet type (Request, Response, All).
8.
Select the address type (Any, Host, or IP).
9.
If you select “Host,” enter a specific address (e.g., 11-22-33-44-55-
66). If you select “IP,” enter a base address and a hexadecimal bit mask
for an address range.
10.
Enable logging if required.
11.
Click Apply.