LevelOne GTL-2691 - Manual (Page 784)

C HAPTER 24 | System Management Commands
File Management
– 784 –
dir This command displays a list of files in flash memory.
S YNTAX
dir [unit:] {boot-rom: | config: | opcode:} [filename]}
unit - Stack unit. (Range: 1-8)
boot-rom
- Boot ROM (or diagnostic) image file.
config - Switch configuration file.
opcode - Run-time operation code image file.
filename - Name of configuration file or code image. If this file
exists but contains errors, information on this file cannot be shown.
D EFAULT S ETTING
None
C OMMAND M ODE
Privileged Exec
C OMMAND U SAGE
◆ If you enter the command dir without any parameters, the system
displays all files.
◆ A colon (:) is required after the specified unit number and file type.
File information is shown below:
E XAMPLE
The following example shows how to display all file information:
Console#dir
File Name Type Startup Modify Time Size(bytes)
-------------------------- -------------- ------- ------------------- ----------
Unit 1:
GTL-2691_Op_V1.2.3.29.bix OpCode N 2012-02-02 10:24:29 14988120
GTL-2691_Op_V1.4.2.10.bix OpCode Y 2012-05-09 09:38:49 15285876
Factory_Default_Config.cfg Config N 2011-12-27 07:20:35 455
startup1.cfg Config Y 2012-10-19 05:48:13 2499
-----------------------------------------------------------------------------
Free space for compressed user config files: 1601536
Console#
Table 50: File Directory Information
Column Heading Description
File Name The name of the file.
Type File types: Boot-Rom, Operation Code, and Config file.
Startup Shows if this file is used when the system is started.
Modify Time The date and time the file was last modified.
Size The length of the file in bytes.