LevelOne GTL-2691 - Manual (Page 596)

C HAPTER 17 | IP Services
Domain Name Service
– 596 –
C OMMAND U SAGE
◆ To enable DNS service on this switch, enable domain lookup status, and
configure one or more name servers (see "Configuring a List of Name
Servers" on page 598 ).
P ARAMETERS
These parameters are displayed:
◆ Domain Lookup – Enables DNS host name-to-address translation.
(Default: Disabled)
◆ Default Domain Name – Defines the default domain name appended
to incomplete host names. Do not include the initial dot that separates
the host name from the domain name.
(Range: 1-127 alphanumeric characters)
W EB I NTERFACE
To configure general settings for DNS:
1.
Click IP Service, DNS.
2.
Select Configure Global from the Action list.
3. Enable domain lookup, and set the default domain name.
4.
Click Apply.
Figure 352: Configuring General Settings for DNS
C ONFIGURING A L IST
OF D OMAIN N AMES
Use the IP Service > DNS - General (Add Domain Name) page to configure
a list of domain names to be tried in sequential order.
CLI R EFERENCES
◆ "ip domain-list" on page 1351
◆ "show dns" on page 1357
C OMMAND U SAGE
◆ Use this page to define a list of domain names that can be appended to
incomplete host names (i.e., host names passed from a client that are
not formatted with dotted notation).