LevelOne GTL-2691 - Manual (Page 1376)

C HAPTER 46 | DHCP Commands
DHCP Server
– 1376 –
hours - Specifies the number of hours in the lease. A days value
must be supplied before you can configure hours. (Range: 0-23)
minutes - Specifies the number of minutes in the lease. A days and
hours value must be supplied before you can configure minutes.
(Range: 0-59)
infinite - Specifies that the lease time is unlimited. This option is
normally used for addresses manually bound to a BOOTP client via
the host command.
D EFAULT S ETTING
One day
C OMMAND M ODES
DHCP Pool Configuration
E XAMPLE
The following example leases an address to clients using this pool for 7
days.
Console(config-dhcp)#lease 7
Console(config-dhcp)#
netbios-name-
server
This command configures NetBIOS Windows Internet Naming Service
(WINS) name servers that are available to Microsoft DHCP clients. Use the
no form to remove the NetBIOS name server list.
S YNTAX
netbios-name-server address1 [address2]
no netbios-name-server
address1 - Specifies IP address of primary NetBIOS WINS name
server.
address2 - Specifies IP address of alternate NetBIOS WINS name
server.
D EFAULT S ETTING
None
C OMMAND M ODE
DHCP Pool Configuration
U SAGE G UIDELINES
Servers are listed in order of preference (starting with address1 as the
most preferred server).