Vlan, Vlan 1114 – LevelOne GTL-2691 User Manual
Page 1114
C
HAPTER
39
| VLAN Commands
Editing VLAN Groups
– 1114 –
vlan
This command configures a VLAN. Use the no form to restore the default
settings or delete a VLAN.
S
YNTAX
vlan vlan-id [name vlan-name] media ethernet
[state {active | suspend}] [rspan]
no vlan vlan-id [name | state]
vlan-id - VLAN ID, specified as a single number, a range of
consecutive numbers separated by a hyphen, or multiple numbers
separated by commas. (Range: 1-4093)
name - Keyword to be followed by the VLAN name.
vlan-name - ASCII string from 1 to 32 characters.
media ethernet - Ethernet media type.
state - Keyword to be followed by the VLAN state.
active - VLAN is operational.
suspend - VLAN is suspended. Suspended VLANs do not pass
packets.
rspan - Keyword to create a VLAN used for mirroring traffic
from remote switches. The VLAN used for RSPN cannot include
VLAN 1 (the switch’s default VLAN), nor VLAN 4093 (the VLAN
used for switch clustering). For more information on configuring
D
EFAULT
S
ETTING
By default only VLAN 1 exists and is active.
C
OMMAND
M
ODE
VLAN Database Configuration
C
OMMAND
U
SAGE
◆
no vlan vlan-id deletes the VLAN.
◆
no vlan vlan-id name removes the VLAN name.
◆
no vlan vlan-id state returns the VLAN to the default state
(i.e., active).
◆
You can configure up to 4093 VLANs on the switch.
N
OTE
:
The switch allows 256 user-manageable VLANs.