LevelOne GTL-2691 - Manual (Page 268)

C HAPTER 9 | Congestion Control
Automatic Traffic Control
– 268 –
4. Set the required threshold beyond which the switch will start dropping
packets.
5. Click Apply.
Figure 117: Configuring Storm Control
A UTOMATIC T RAFFIC C ONTROL
Use the Traffic > Congestion Control > Auto Traffic Control pages to
configure bounding thresholds for broadcast and multicast storms which
can automatically trigger rate limits or shut down a port.
CLI R EFERENCES
◆ "Automatic Traffic Control Commands" on page 1041
C OMMAND U SAGE
ATC includes storm control for broadcast or multicast traffic. The control
response for either of these traffic types is the same, as shown in the
following diagrams.
Figure 118: Storm Control by Limiting the Traffic Rate
Storm Alarm
Fire TRAP
Alarm Fire
Threshold
（1～255kpps）
AlarmClear
Threshold
（1～255kpps）
Traffic
[kpps]
Time
Traffic without storm control
Traffic with storm control
Apply Timer
expired
(0～300sec)
Auto Storm Control
Release Timer
expired
(0～300sec)
Storm Alarm
Fire TRAP
StromAlarm
ClearTRAP
TrafficControl
Apply Trap
StromAlarm
ClearTRAP
TrafficControl
Release Trap
Storm Alarm
Fire TRAP
Alarm Fire
Threshold
（1～255kpps）
AlarmClear
Threshold
（1～255kpps）
Traffic
[kpps]
Time
Traffic without storm control
Traffic with storm control
Apply Timer
expired
(0～300sec)
Auto Storm Control
Release Timer
expired
(0～300sec)
Storm Alarm
Fire TRAP
StromAlarm
ClearTRAP
TrafficControl
Apply Trap
StromAlarm
ClearTRAP
TrafficControl
Release Trap