LevelOne GTL-2691 - Manual (Page 1377)

C HAPTER 46 | DHCP Commands
DHCP Server
– 1377 –
E XAMPLE
Console(config-dhcp)#netbios-name-server 10.1.0.33 10.1.0.34
Console(config-dhcp)#
R ELATED C OMMANDS
netbios-node-type (1377)
netbios-node-type This command configures the NetBIOS node type for Microsoft DHCP
clients. Use the no form to remove the NetBIOS node type.
S YNTAX
netbios-node-type type
no netbios-node-type
type - Specifies the NetBIOS node type:
broadcast
hybrid (recommended)
mixed
peer-to-peer
D EFAULT S ETTING
None
C OMMAND M ODE
DHCP Pool Configuration
E XAMPLE
Console(config-dhcp)#netbios-node-type hybrid
Console(config-dhcp)#
R ELATED C OMMANDS
netbios-name-server (1376)
network This command configures the subnet number and mask for a DHCP address
pool. Use the no form to remove the subnet number and mask.
S YNTAX
network network-number [mask]
no network
network-number - The IP address of the DHCP address pool.
mask - The bit combination that identifies the network (or subnet)
and the host portion of the DHCP address pool.