LevelOne GTL-2691 - Manual (Page 797)

C HAPTER 24 | System Management Commands
Line
– 797 –
E XAMPLE
To set the timeout to two minutes, enter this command:
Console(config-line)#timeout login response 120
Console(config-line)#
disconnect This command terminates an SSH, Telnet, or console connection.
S YNTAX
disconnect session-id
session-id – The session identifier for an SSH, Telnet or console
connection. (Range: 0-8)
C OMMAND M ODE
Privileged Exec
C OMMAND U SAGE
Specifying session identifier “0” will disconnect the console connection.
Specifying any other identifiers for an active session will disconnect an SSH
or Telnet connection.
E XAMPLE
Console#disconnect 1
Console#
R ELATED C OMMANDS
show ssh (898)
show users (775)
show line This command displays the terminal line’s parameters.
S YNTAX
show line [console | vty]
console - Console terminal line.
vty - Virtual terminal for remote console access (i.e., Telnet).
D EFAULT S ETTING
Shows all lines
C OMMAND M ODE
Normal Exec, Privileged Exec