LevelOne GTL-2691 - Manual (Page 1306)

C HAPTER 43 | LLDP Commands
– 1306 –
E XAMPLE
Note that an IP phone or other end-node device which advertises LLDP-
MED capabilities must be connected to the switch for information to be
displayed in the “Device Class” field.
Console#show lldp info remote-device
LLDP Remote Devices Information
Interface Chassis ID Port ID System Name
--------- ----------------- ----------------- ---------------------
Eth 1/1 00-E0-0C-10-90-00 00-E0-0C-10-90-0C
Eth 1/2 00-E0-0C-9C-CA-10 00-E0-0C-9C-CA-11
Console#show lldp info remote-device detail ethernet 1/1
---------------------------------------------------------------
Local Port Name : Eth 1/2
Chassis Type : MAC Address
Chassis ID : 00-E0-0C-9C-CA-10
Port ID Type : MAC Address
Port ID : 00-E0-0C-9C-CA-11
System Name :
System Description : GTL-2691 Managed L3 Stackable Switch
Port Description : Ethernet Port on unit 1, port 1
SystemCapSupported : Bridge, Router
SystemCapEnabled : Bridge, Router
Remote Management Address :
192.168.0.2 (IPv4)
Remote Port VID : 1
Remote VLAN Name :
VLAN-1 : DefaultVlan
Remote Port-Protocol VLAN :
VLAN-3 : supported, enabled
Remote Protocol Identity (Hex) :
88-CC
Remote MAC/PHY configuration status :
Remote port auto-neg supported : Yes
Remote port auto-neg enabled : Yes
Remote port auto-neg advertised cap (Hex) : 6C01
Remote port MAU type : 30
Remote Link Aggregation :
Remote link aggregation capable : Yes
Remote link aggregation enable : No
Remote link aggregation port ID : 0
Remote Max Frame Size : 1518
LLDP-MED Capability :
Device Class : Network Connectivity
Supported Capabilities : LLDP-MED Capabilities
Network Policy
Location Identification
Extended Power via MDI - PSE
Inventory
Current Capabilities : LLDP-MED Capabilities
Location Identification
Extended Power via MDI - PSE
Inventory
Location Identification :
Location Data Format : Civic Address LCI
Country Name : TW
What : 2
Extended Power via MDI :
Power Type : PSE
Power Source : Unknown