LevelOne GTL-2691 - Manual (Page 182)

C HAPTER 5 | Interface Configuration
Trunk Configuration
– 182 –
Figure 48: Showing Members of a Dynamic Trunk
To configure connection parameters for a dynamic trunk:
1. Click Interface, Trunk, Dynamic.
2. Select Configure Trunk from the Step List.
3. Select Configure from the Action List.
4. Modify the required interface settings. (See "Configuring by Port List"
on page 161 for a description of the interface settings.)
5.
Click Apply.
Figure 49: Configuring Connection Settings for Dynamic Trunks
To show connection parameters for a dynamic trunk:
1.
Click Interface, Trunk, Dynamic.
2. Select Configure Trunk from the Step List.
3. Select Show from the Action List.