LevelOne GTL-2691 - Manual (Page 612)

C HAPTER 17 | IP Services
Forwarding UDP Service Requests
– 612 –
E NABLING THE UDP
H ELPER
Use the IP Service > UDP Helper > General page to enable the UDP helper
globally on the switch.
CLI R EFERENCES
◆ "ip helper" on page 1404
P ARAMETERS
These parameters are displayed:
◆ UDP Helper Status – Enables or disables the UDP helper.
(Default: Disabled)
W EB I NTERFACE
To enable the UDP help:
1. Click IP Service, UDP Helper, General.
2. Mark the Enabled check box.
3. Click Apply.
Figure 371: Enabling the UDP Helper
S PECIFYING UDP
D ESTINATION P ORTS
Use the IP Service > UDP Helper > Forwarding page to specify the UDP
destination ports for which broadcast traffic will be forwarded when the
UDP helper is enabled.
CLI R EFERENCES
◆ "ip forward-protocol udp" on page 1403
C OMMAND U SAGE
◆ Up to 100 UDP ports can be specified with this command for forwarding
to one or more remote servers.
P ARAMETERS
These parameters are displayed:
◆ Destination UDP Port – UDP application port for which UDP service
requests are forwarded. (Range: 1-65535)
The following UDP ports are included in the forwarding list when the
UDP helper is enabled, and a remote server address is configured:
BOOTP client
port 67
BOOTP server port 68
Domain Name Service port 53