LevelOne GTL-2691 - Manual (Page 1371)

C HAPTER 46 | DHCP Commands
DHCP Server
– 1371 –
C OMMAND U SAGE
If the DHCP server is running, you must restart it to implement any
configuration changes.
E XAMPLE
Console(config)#service dhcp
Console(config)#
bootfile This command specifies the name of the default boot image for a DHCP
client. This file should placed on the Trivial File Transfer Protocol (TFTP)
server specified with the next-server command. Use the no form to delete
the boot image name.
S YNTAX
bootfile filename
no bootfile
filename - Name of the file that is used as a default boot image.
D EFAULT S ETTING
None
C OMMAND M ODE
DHCP Pool Configuration
E XAMPLE
Console(config-dhcp)#bootfile wme.bat
Console(config-dhcp)#
R ELATED C OMMANDS
next-server (1378)
client-identifier This command specifies the client identifier of a DHCP client. Use the no
form to remove the client identifier.
S YNTAX
client-identifier {text text | hex hex}
no client-identifier
text - A text string. (Range: 1-15 characters)
hex - The hexadecimal value.
D EFAULT S ETTING
None