LevelOne GTL-2691 - Manual (Page 1296)

C HAPTER 43 | LLDP Commands
– 1296 –
lldp dot1-tlv vlan-
name
This command configures an LLDP-enabled port to advertise its VLAN
name. Use the no form to disable this feature.
S YNTAX
[no] lldp dot1-tlv vlan-name
D EFAULT S ETTING
Enabled
C OMMAND M ODE
Interface Configuration (Ethernet, Port Channel)
C OMMAND U SAGE
This option advertises the name of all VLANs to which this interface has
been assigned. See "switchport allowed vlan" on page 1117 and "protocol-
vlan protocol-group (Configuring Interfaces)" on page 1141 .
E XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot1-tlv vlan-name
Console(config-if)#
lldp dot3-tlv link-agg This command configures an LLDP-enabled port to advertise link
aggregation capabilities. Use the no form to disable this feature.
S YNTAX
[no] lldp dot3-tlv link-agg
D EFAULT S ETTING
Enabled
C OMMAND M ODE
Interface Configuration (Ethernet, Port Channel)
C OMMAND U SAGE
This option advertises link aggregation capabilities, aggregation status of
the link, and the 802.3 aggregated port identifier if this interface is
currently a link aggregation member.
E XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot3-tlv link-agg
Console(config-if)#