LevelOne GTL-2691 - Manual (Page 840)

C HAPTER 25 | SNMP Commands
SNMPv3 Commands
– 840 –
show snmp
engine-id
This command shows the SNMP engine ID.
C OMMAND M ODE
Privileged Exec
E XAMPLE
This example shows the default engine ID.
Console#show snmp engine-id
Local SNMP EngineID: 8000002a8000000000e8666672
Local SNMP EngineBoots: 1
Remote SNMP EngineID IP address
80000000030004e2b316c54321 192.168.1.19
Console#
show snmp group Four default groups are provided – SNMPv1 read-only access and read/
write access, and SNMPv2c read-only access and read/write access.
C OMMAND M ODE
Privileged Exec
E XAMPLE
Console#show snmp group
Group Name : r&d
Security Model : v3
Read View : defaultview
Write View : daily
Notify View : defaultview
Storage Type : nonvolatile
Row Status : active
Group Name : public
Security Model : v1
Read View : defaultview
Write View : No writeview specified
Notify View : No notifyview specified
Storage Type : volatile
Row Status : active
Group Name : public
Security Model : v2c
Read View : defaultview
Table 61: show snmp engine-id - display description
Field Description
Local SNMP engineID String identifying the engine ID.
Local SNMP engineBoots The number of times that the engine has (re-)initialized since the
snmp EngineID was last configured.
Remote SNMP engineID String identifying an engine ID on a remote device.
IP address IP address of the device containing the corresponding remote
SNMP engine.