LevelOne GTL-2691 - Manual (Page 727)

C HAPTER 21 | Multicast Routing
Configuring PIM for IPv4
– 727 –
Figure 468: Showing Information About the BSR
D ISPLAYING RP
M APPING
Use the Routing Protocol > PIM > SM (Show Information – Show RP
Mapping) page to display active RPs and associated multicast routing
entries.
CLI R EFERENCES
◆ "show ip pim rp mapping" on page 1574
P ARAMETERS
These parameters are displayed:
◆ Groups – A multicast group address.
◆ RP Address – IP address of the RP for the listed multicast group.
◆ Information Source – RP that advertised the mapping, how the RP
was selected (Static or Bootstrap), and the priority used in the bidding
process.
◆ Uptime – The time this RP has been up and running
◆ Expire – The time before this entry will be removed.
W EB I NTERFACE
To display the RPs mapped to multicast groups:
1. Click Multicast, Multicast Routing, SM.
2.
Select Show Information from the Step list.
3.
Select Show RP Mapping from the Action list.