LevelOne GTL-2691 - Manual (Page 1163)

C HAPTER 40 | Class of Service Commands
Priority Commands (Layer 3 and 4)
– 1163 –
map ip port (Global
Configuration)
This command enables IP port mapping (i.e., class of service mapping for
TCP/UDP sockets). Use the no form to disable IP port mapping.
S YNTAX
[no] map ip port
D EFAULT S ETTING
Disabled
C OMMAND M ODE
Global Configuration
C OMMAND U SAGE
The precedence for priority mapping is IP Port, IP Precedence or IP DSCP,
and default switchport priority.
E XAMPLE
The following example shows how to enable TCP/UDP port mapping
globally:
Console(config)#map ip port
Console(config)#
map ip precedence
(Global Configuration)
This command enables IP precedence mapping (i.e., IP Type of Service).
Use the no form to disable IP precedence mapping.
S YNTAX
[no] map ip precedence
D EFAULT S ETTING
Disabled
C OMMAND M ODE
Global Configuration
C OMMAND U SAGE
◆ The precedence for priority mapping is IP Port, IP Precedence or IP
DSCP, and default switchport priority.
◆ IP Precedence and IP DSCP cannot both be enabled. Enabling one of
these priority types will automatically disable the other type.