LevelOne GTL-2691 - Manual (Page 284)

C HAPTER 10 | Class of Service
Layer 3/4 Priority Settings
– 284 –
N OTE :
IP Precedence settings apply to all interfaces.
P ARAMETERS
These parameters are displayed:
◆ IP Precedence Mapping Status – Enables or disables the use of IP
Precedence priorities and the mapping of these priority values to CoS
values. (Default: Disabled)
◆ IP Precedence – 3-bit precedence value. (Range: 0-7)
◆ CoS – Class-of-Service value (Range: 0-7)
W EB I NTERFACE
To set the IP Precedence to CoS priority map:
1.
Click Traffic, Priority, IP Precedence to CoS.
2.
Locate an entry from the IP Precedence table, and enter a value in the
CoS field.
3. Click Apply.
Figure 128: Mapping IP Precedence Priority Values
M APPING IP P ORT
P RIORITY
Use the Traffic > Priority > IP Port to CoS page to map network
applications designated by a TCP/UDP destination port number in the frame
header to CoS values for internal processing.
CLI R EFERENCES
◆ "map ip port (Global Configuration)" on page 1163
◆ "map ip port (Interface Configuration)" on page 1165
◆ "show map ip port" on page 1167