LevelOne GTL-2691 - Manual (Page 792)

C HAPTER 24 | System Management Commands
Line
– 792 –
◆ This command controls login authentication via the switch itself. To
configure user names and passwords for remote authentication
servers, you must use the RADIUS or TACACS software installed on
those servers.
E XAMPLE
Console(config-line)#login local
Console(config-line)#
R ELATED C OMMANDS
username (865)
password (793)
parity This command defines the generation of a parity bit. Use the no form to
restore the default setting.
S YNTAX
parity {none | even | odd}
no parity
none - No parity
even - Even parity
odd - Odd parity
D EFAULT S ETTING
No parity
C OMMAND M ODE
Line Configuration
C OMMAND U SAGE
Communication protocols provided by devices such as terminals and
modems often require a specific parity bit setting.
E XAMPLE
To specify no parity, enter this command:
Console(config-line)#parity none
Console(config-line)#