Table 55: show logging trap - display description – LevelOne GTL-2691 User Manual
Page 804
C
HAPTER
24
| System Management Commands
Event Logging
– 804 –
E
XAMPLE
The following example shows that system logging is enabled, the message
level for flash memory is “errors” (i.e., default level 3 - 0), and the
message level for RAM is “debugging” (i.e., default level 7 - 0).
Console#show logging flash
Syslog logging: Enabled
History logging in FLASH: level errors
Console#show logging ram
Syslog logging: Enabled
History logging in RAM: level debugging
Console#
The following example displays settings for the trap function.
Console#show logging trap
Remote Log Status : Disabled
Remote Log Facility Type : Local use 7
Remote Log Level Type : Debugging messages
Remote Log Server IP Address : 0.0.0.0
Remote Log Server IP Address : 0.0.0.0
Remote Log Server IP Address : 0.0.0.0
Remote Log Server IP Address : 0.0.0.0
Remote Log Server IP Address : 0.0.0.0
Console#
R
ELATED
C
OMMANDS
Table 54: show logging flash/ram - display description
Field
Description
Syslog logging
Shows if system logging has been enabled via the
command.
History logging in FLASH
The message level(s) reported based on the
command.
History logging in RAM
The message level(s) reported based on the
command.
Table 55: show logging trap - display description
Field
Description
Syslog logging
Shows if system logging has been enabled via the
command.
REMOTELOG status
Shows if remote logging has been enabled via the
command.
REMOTELOG facility type
The facility type for remote logging of syslog messages as
specified in the
command.
REMOTELOG level type
The severity threshold for syslog messages sent to a remote
server as specified in the
command.
REMOTELOG
server IP address
The address of syslog servers as specified in the
command.