LevelOne GTL-2691 - Manual (Page 1314)

C HAPTER 44 | CFM Commands
Defining CFM Structures
– 1314 –
ethernet cfm ais
period
This command configures the interval at which AIS information is sent. Use
the no form to restore the default setting.
S YNTAX
ethernet cfm ais period period md domain-name ma ma-name
no ethernet cfm ais period md domain-name ma ma-name
period – The interval at which AIS information is sent.
(Options: 1 second, 60 seconds)
domain-name – Domain name. (Range: 1-43 alphanumeric
characters)
ma-name – Maintenance association name. (Range: 1-44
alphanumeric characters)
D EFAULT S ETTING
1 second
C OMMAND M ODE
Global Configuration
E XAMPLE
This example sets the interval for sending frames with AIS information at
60 seconds.
Console(config)#ethernet cfm ais period 60 md voip ma rd
Console(config)#
ethernet cfm ais
suppress alarm
This command suppresses sending frames containing AIS information
following the detection of defect conditions. Use the no form to restore the
default setting.
S YNTAX
[no] ethernet cfm ais suppress alarm md domain-name
ma ma-name
domain-name – Domain name. (Range: 1-43 alphanumeric
characters)
ma-name – Maintenance association name. (Range: 1-44
alphanumeric characters)
D EFAULT S ETTING
Suppression is disabled
C OMMAND M ODE
Global Configuration