Username, Username 865, Table 69: default login settings – LevelOne GTL-2691 User Manual
Page 865
C
HAPTER
28
| Authentication Commands
User Accounts
– 865 –
E
XAMPLE
Console(config)#enable password level 15 0 admin
Console(config)#
R
ELATED
C
OMMANDS
username
This command adds named users, requires authentication at login,
specifies or changes a user's password (or specify that no password is
required), or specifies or changes a user's access level. Use the no form to
remove a user name.
S
YNTAX
username name {access-level level | nopassword |
password {0 | 7} password}
no username name
name - The name of the user. (Maximum length: 32 characters,
case sensitive. Maximum users: 16)
access-level level - Specifies the user level.
The device has two predefined privilege levels:
0: Normal Exec, 15: Privileged Exec.
nopassword - No password is required for this user to log in.
{0 | 7} - 0 means plain password, 7 means encrypted password.
password password - The authentication password for the user.
(Maximum length: 32 characters plain text or encrypted, case
sensitive)
D
EFAULT
S
ETTING
The default access level is Normal Exec.
The factory defaults for the user names and passwords are:
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
The encrypted password is required for compatibility with legacy password
settings (i.e., plain text or encrypted) when reading the configuration file
during system bootup or when downloading the configuration file from an
FTP/TFTP server. There is no need for you to manually configure encrypted
passwords.
Table 69: Default Login Settings
username
access-level
password
guest
admin
0
15
guest
admin