LevelOne GTL-2691 - Manual (Page 845)

C HAPTER 25 | SNMP Commands
Additional Trap Commands
– 845 –
show nlm
oper-status
This command shows the operational status of configured notification logs.
C OMMAND M ODE
Privileged Exec
E XAMPLE
Console#show nlm oper-status
Filter Name: A1
Oper-Status: Operational
Console#
show snmp
notify-filter
This command displays the configured notification logs.
C OMMAND M ODE
Privileged Exec
E XAMPLE
This example displays the configured notification logs and associated
target hosts.
Console#show snmp notify-filter
Filter profile name IP address
---------------------------- ----------------
A1 10.1.19.23
Console#
Additional Trap Commands
memory This command sets an SNMP trap based on configured thresholds for
memory utilization. Use the no form to restore the default setting.
S YNTAX
memory {rising rising-threshold | falling falling-threshold}
no memory {rising | falling}
rising-threshold - Rising threshold for memory utilization alarm
expressed in percentage. (Range: 1-100)
falling-threshold - Falling threshold for memory utilization alarm
expressed in percentage. (Range: 1-100)
D EFAULT S ETTING
Rising Threshold: 90%
Falling Threshold: 70%
C OMMAND M ODE
Global Configuration