LevelOne GTL-2691 - Manual (Page 1201)

C HAPTER 42 | Multicast Filtering Commands
IGMP Snooping
– 1201 –
ip igmp snooping
vlan static
This command adds a port to a multicast group. Use the no form to
remove the port.
S YNTAX
[no] ip igmp snooping vlan vlan-id static ip-address interface
vlan-id - VLAN ID (Range: 1-4093)
ip-address - IP address for multicast group
interface
ethernet unit/port
unit - Stack unit. (Range: 1-8)
port - Port number. (Range: 1-26)
port-channel channel-id (Range: 1-32)
D EFAULT S ETTING
None
C OMMAND M ODE
Global Configuration
C OMMAND U SAGE
◆ Static multicast entries are never aged out.
◆ When a multicast entry is assigned to an interface in a specific VLAN,
the corresponding traffic can only be forwarded to ports within that
VLAN.
E XAMPLE
The following shows how to statically configure a multicast group on a port.
Console(config)#ip igmp snooping vlan 1 static 224.0.0.12 ethernet 1/5
Console(config)#
show ip igmp
snooping
This command shows the IGMP snooping, proxy, and query configuration
settings.
S YNTAX
show ip igmp snooping [vlan vlan-id]
vlan-id - VLAN ID (1-4094)
C OMMAND M ODE
Privileged Exec