LevelOne GTL-2691 - Manual (Page 907)

C HAPTER 28 | Authentication Commands
802.1X Port Authentication
– 907 –
D EFAULT
30 seconds
C OMMAND M ODE
Interface Configuration
E XAMPLE
Console(config)#interface eth 1/2
Console(config-if)#dot1x timeout tx-period 300
Console(config-if)#
dot1x re-
authenticate
This command forces re-authentication on all ports or a specific interface.
S YNTAX
dot1x re-authenticate [interface]
interface
ethernet unit/port
unit - Stack unit. (Range: 1-8)
port - Port number. (Range: 1-26)
C OMMAND M ODE
Privileged Exec
C OMMAND U SAGE
The re-authentication process verifies the connected client’s user ID and
password on the RADIUS server. During re-authentication, the client
remains connected the network and the process is handled transparently
by the dot1x client software. Only if re-authentication fails is the port
blocked.
E XAMPLE
Console#dot1x re-authenticate
Console#