LevelOne GTL-2691 - Manual (Page 1304)

C HAPTER 43 | LLDP Commands
– 1304 –
Console#show lldp config detail ethernet 1/1
LLDP Port Configuration Detail
Port : Eth 1/1
Admin Status : Tx-Rx
Notification Enabled : True
Basic TLVs Advertised:
port-description
system-name
system-description
system-capabilities
management-ip-address
802.1 specific TLVs Advertised:
*port-vid
*vlan-name
*proto-vlan
*proto-ident
802.3 specific TLVs Advertised:
*mac-phy
*link-agg
*max-frame
MED Configuration:
MED Notification Status : Enabled
MED Enabled TLVs Advertised:
*med-cap
*network-policy
*location
*inventory
MED Location Identification:
Location Data Format : Civic Address LCI
Civic Address Status : Enabled
Country Name : US
What : 2
CA-Type : 1
CA-Value : Alabama
CA-Type : 2
CA-Value : Tuscaloosa
Console#
show lldp info local-
device
This command shows LLDP global and interface-specific configuration
settings for this device.
S YNTAX
show lldp info local-device [detail interface]
detail - Shows configuration summary.
interface
ethernet unit/port
unit - Stack unit. (Range: 1-8)
port - Port number. (Range: 1-26)
port-channel channel-id (Range: 1-32)
C OMMAND M ODE
Privileged Exec