Table 127: private vlan commands – LevelOne GTL-2691 User Manual
Page 1135
C
HAPTER
39
| VLAN Commands
Configuring Private VLANs
– 1135 –
To configure private VLANs, follow these steps:
1.
Use the
command to designate one or more community
VLANs and the primary VLAN that will channel traffic outside of the
community groups.
2.
Use the
command to map the community
VLAN(s) to the primary VLAN.
3.
Use the
command to configure ports as
promiscuous (i.e., having access to all ports in the primary VLAN) or
host (i.e., community port).
4.
Use the
switchport private-vlan host-association
command to assign a
port to a community VLAN.
5.
Use the
switchport private-vlan mapping
command to assign a port to a
primary VLAN.
6.
Use the
command to verify your configuration
settings.
Table 127: Private VLAN Commands
Command
Function
Mode
Edit Private VLAN Groups
Adds or deletes primary or community VLANs
VC
Associates a community VLAN with a primary VLAN
VC
Configure Private VLAN Interfaces
Sets an interface to host mode or promiscuous mode IC
Associates an interface with a secondary VLAN
IC
Maps an interface to a primary VLAN
IC
Display Private VLAN Information
Shows private VLAN information
NE, PE