LevelOne GTL-2691 - Manual (Page 802)

C HAPTER 24 | System Management Commands
Event Logging
– 802 –
D EFAULT S ETTING
Disabled
Level 7
C OMMAND M ODE
Global Configuration
C OMMAND U SAGE
◆ Using this command with a specified level enables remote logging and
sets the minimum severity level to be saved.
◆ Using this command without a specified level also enables remote
logging, but restores the minimum severity level to the default.
E XAMPLE
Console(config)#logging trap 4
Console(config)#
clear log This command clears messages from the log buffer.
S YNTAX
clear log [flash | ram]
flash - Event history stored in flash memory (i.e., permanent
memory).
ram - Event history stored in temporary RAM (i.e., memory flushed
on power reset).
D EFAULT S ETTING
Flash and RAM
C OMMAND M ODE
Privileged Exec
E XAMPLE
Console#clear log
Console#
R ELATED C OMMANDS
show log (803)