LevelOne GTL-2691 - Manual (Page 1228)

C HAPTER 42 | Multicast Filtering Commands
MVR for IPv4
– 1228 –
mvr This command enables Multicast VLAN Registration (MVR) globally on the
switch. Use the no form of this command to globally disable MVR.
S YNTAX
[no] mvr
D EFAULT S ETTING
Disabled
C OMMAND M ODE
Global Configuration
C OMMAND U SAGE
Only IGMP version 2 or 3 hosts can issue multicast join or leave messages.
If MVR must be configured for an IGMP version 1 host, the multicast
groups must be statically assigned using the mvr vlan group command.
E XAMPLE
The following example enables MVR globally.
Console(config)#mvr
Console(config)#
mvr associated-
profile
This command binds the MVR group addresses specified in a profile to an
MVR domain. Use the no form of this command to remove the binding.
S YNTAX
[no] mvr domain domain-id associated-profile profile-name
domain-id - An independent multicast domain. (Range: 1-5)
profile-name - The name of a profile containing one or more MVR
group addresses. (Range: 1-21 characters)
D EFAULT S ETTING
Disabled
C OMMAND M ODE
Global Configuration
show mvr profile Shows all configured MVR profiles PE
show mvr statistics Shows MVR protocol statistics for the specified
interface
PE
Table 147: Multicast VLAN Registration Commands (Continued)
Command Function Mode