Pppoe intermediate agent, Pppoe intermediate- agent, Pppoe intermediate-agent – LevelOne GTL-2691 User Manual
Page 913: Table 81: pppoe intermediate agent commands, Pppoe intermediate, Agent
C
HAPTER
28
| Authentication Commands
PPPoE Intermediate Agent
– 913 –
PPP
O
E I
NTERMEDIATE
A
GENT
This section describes commands used to configure the PPPoE Intermediate
Agent (PPPoE IA) relay parameters required for passing authentication
messages between a client and broadband remote access servers.
pppoe intermediate-
agent
This command enables the PPPoE Intermediate Agent globally on the
switch. Use the no form to disable this feature.
S
YNTAX
[no] pppoe intermediate-agent
D
EFAULT
S
ETTING
Disabled
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
◆
The switch inserts a tag identifying itself as a PPPoE Intermediate Agent
residing between the attached client requesting network access and the
ports connected to broadband remote access servers (BRAS). The
switch extracts access-loop information from the client’s PPPoE Active
Discovery Request, and forwards this information to all trusted ports
pppoe intermediate-agent trust
command. The BRAS
detects the presence of the subscriber’s circuit-ID tag inserted by the
switch during the PPPoE discovery phase, and sends this tag as a NAS-
Table 81: PPPoE Intermediate Agent Commands
Command
Function
Mode
Enables the PPPoE IA globally on the switch
GC
Sets the access node identifier and generic error
message for the switch
GC
Enables the PPPoE IA on an interface
IC
Sets the circuit-id or remote-id for an interface
IC
Sets the trust mode for an interface
IC
Enables the stripping of vendor tags from PPPoE
Discovery packets sent from a PPPoE server
IC
Clears PPPoE IA statistics
PE
Displays PPPoE IA configuration settings
PE
Displays PPPoE IA statistics
PE