LevelOne GTL-2691 - Manual (Page 1369)

C HAPTER 46 | DHCP Commands
DHCP Server
– 1369 –
ip dhcp excluded-
address
This command specifies IP addresses that the DHCP server should not
assign to DHCP clients. Use the no form to remove the excluded IP
addresses.
S YNTAX
[no] ip dhcp excluded-address low-address [high-address]
low-address - An excluded IP address, or the first IP address in an
excluded address range.
high-address - The last IP address in an excluded address range.
D EFAULT S ETTING
All IP pool addresses may be assigned.
C OMMAND M ODE
Global Configuration
E XAMPLE
Console(config)#ip dhcp excluded-address 10.1.0.19
Console(config)#
lease Sets the duration an IP address is assigned to a DHCP
client
DC
netbios-name-server Configures NetBIOS Windows Internet Naming Service
(WINS) name servers available to Microsoft DHCP
clients
DC
netbios-node-type Configures NetBIOS node type for Microsoft DHCP
clients
DC
network Configures the subnet number and mask for a DHCP
address pool
DC
next-server Configures the next server in the boot process of a
DHCP client
DC
clear ip dhcp binding Deletes an automatic address binding from the DHCP
server database
PE
show ip dhcp binding Displays address bindings on the DHCP server PE, NE
show ip dhcp Displays DHCP address pools PE
* These commands are used for manually binding an address to a client.
Table 186: DHCP Server Commands (Continued)
Command Function Mode