LevelOne GTL-2691 - Manual (Page 1111)

C HAPTER 39 | VLAN Commands
GVRP and Bridge Extension Commands
– 1111 –
C OMMAND U SAGE
GVRP cannot be enabled for ports set to Access mode using the switchport
mode command.
E XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#switchport gvrp
Console(config-if)#
show bridge-ext This command shows the configuration for bridge extension commands.
D EFAULT S ETTING
None
C OMMAND M ODE
Privileged Exec
C OMMAND U SAGE
See "Displaying Bridge Extension Capabilities" on page 133 for a
description of the displayed items.
E XAMPLE
Console#show bridge-ext
Maximum Supported VLAN Numbers : 4093
Maximum Supported VLAN ID : 4093
Extended Multicast Filtering Services : No
Static Entry Individual Port : Yes
VLAN Learning : IVL
Configurable PVID Tagging : Yes
Local VLAN Capable : No
Traffic Classes : Enabled
Global GVRP Status : Disabled
Console#
show garp timer This command shows the GARP timers for the selected interface.
S YNTAX
show garp timer [interface]
interface
ethernet unit/port
unit - Stack unit. (Range: 1-8)
port - Port number. (Range: 1-26)
port-channel channel-id (Range: 1-32)
D EFAULT S ETTING
Shows all GARP timers.