LevelOne GTL-2691 - Manual (Page 225)

C HAPTER 6 | VLAN Configuration
Protocol VLANs
– 225 –
W EB I NTERFACE
To configure a protocol group:
1. Click VLAN, Protocol.
2. Select Configure Protocol from the Step list.
3. Select Add from the Action list.
4. Select an entry from the Frame Type list.
5. Select an entry from the Protocol Type list.
6. Enter an identifier for the protocol group.
7. Click Apply.
Figure 83: Configuring Protocol VLANs
To configure a protocol group:
1.
Click VLAN, Protocol.
2.
Select Configure Protocol from the Step list.
3.
Select Show from the Action list.
Figure 84: Displaying Protocol VLANs