LevelOne GTL-2691 - Manual (Page 1484)

C HAPTER 49 | IP Routing Commands
Open Shortest Path First (OSPFv2)
– 1484 –
default-metric This command sets the default metric for external routes imported from
other protocols. Use the no form to remove the default metric for the
supported protocol types.
S YNTAX
default-metric metric-value
no default-metric
metric-value – Metric assigned to all external routes imported from
other protocols. (Range: 0-16777214)
C OMMAND M ODE
Router Configuration
D EFAULT S ETTING
20
C OMMAND U SAGE
◆ The default metric must be used to resolve the problem of
redistributing external routes from other protocols that use
incompatible metrics.
◆ This command does not override the metric value set by the
redistribute command. When a metric value has not been configured by
the redistribute command, the default-metric command sets the
metric value to be used for all imported external routes.
E XAMPLE
Console(config-router)#default-metric 100
Console(config-router)#
R ELATED C OMMANDS
redistribute (1485)