LevelOne GTL-2691 - Manual (Page 415)

C HAPTER 14 | Basic Administration Protocols
Link Layer Discovery Protocol
– 415 –
■
Max Frame Size – The maximum frame size. (See "Configuring
Support for Jumbo Frames" on page 132 for information on
configuring the maximum frame size for this switch
■
MAC/PHY Configuration/Status – The MAC/PHY configuration
and status which includes information about auto-negotiation
support/capabilities, and operational Multistation Access Unit (MAU)
type.
◆ MED TLVs – Configures general information included in the MED TLV
field of advertised messages.
■
Capabilities – This option advertises LLDP-MED TLV capabilities,
allowing Media Endpoint and Connectivity Devices to efficiently
discover which LLDP-MED related TLVs are supported on the switch.
■
Inventory – This option advertises device details useful for
inventory management, such as manufacturer, model, software
version and other pertinent information.
■
Location – This option advertises location identification details.
■
Network Policy – This option advertises network policy
configuration information, aiding in the discovery and diagnosis of
VLAN configuration mismatches on a port. Improper network policy
configurations frequently result in voice quality degradation or
complete service disruption.
W EB I NTERFACE
To configure LLDP interface attributes:
1.
Click Administration, LLDP.
2.
Select Configure Interface from the Step list.
3.
Select an interface from the Port or Trunk list.
4.
Set the LLDP transmit/receive mode, specify whether or not to send
SNMP trap messages, and select the information to advertise in LLDP
messages.
5. Click Apply.