LevelOne GTL-2691 - Manual (Page 1452)

C HAPTER 49 | IP Routing Commands
Global Routing Configuration
– 1452 –
Information Base (see Command Usage under the show ip route
command).
E XAMPLE
Console#show ip route database
Codes: C - connected, S - static, R - RIP, B - BGP
O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
> - selected route, * - FIB route, p - stale info
C *> 127.0.0.0/8 is directly connected, lo0
C *> 192.168.1.0/24 is directly connected, VLAN1
Console#
show ip route
summary
This command displays summary information for the routing table.
C OMMAND M ODE
Privileged Exec
E XAMPLE
In the following example, the numeric identifier following the named
routing table (that is, the Forwarding Information Base) is the FIB ID.
Console#show ip route summary
IP routing table name is Default-IP-Routing-Table(0)
IP routing table maximum-paths is 8
Connected 2
Total 2
Console#
show ip traffic This command displays statistics for IP, ICMP, UDP, TCP and ARP protocols.
C OMMAND M ODE
Privileged Exec
E XAMPLE
Console#show ip traffic
IP Statistics:
IP received
4877 total received
header errors
unknown protocols
address errors
discards
4763 delivers
reassembly request datagrams
reassembled succeeded
reassembled failed