Version, Version 1466 – LevelOne GTL-2691 User Manual
Page 1466
C
HAPTER
49
| IP Routing Commands
Routing Information Protocol (RIP)
– 1466 –
version
This command specifies a RIP version used globally by the router. Use the
no form to restore the default value.
S
YNTAX
version {1 | 2}
no version
1 - RIP Version 1
2 - RIP Version 2
D
EFAULT
S
ETTING
Receive: Accepts RIPv1 or RIPv2 packets
Send: Route information is broadcast to other routers with RIPv2.
C
OMMAND
M
ODE
Router Configuration
C
OMMAND
U
SAGE
◆
When this command is used to specify a global RIP version, any VLAN
interface not previously set by the
or
command will use the global RIP version setting.
◆
When the no form of this command is used to restore the default value,
any VLAN interface not previously set by the
or
command will be set to the default send or receive
version.
◆
Any configured interface settings take precedence over the global
settings.
E
XAMPLE
This example sets the global version for RIP to send and receive version 2
packets.
Console(config-router)#version 2
Console(config-router)#
R
ELATED
C
OMMANDS