LevelOne GTL-2691 - Manual (Page 166)

C HAPTER 5 | Interface Configuration
Port Configuration
– 166 –
◆ Media Type – Media type used.
(Options: Copper-Forced, SFP-Forced, or SFP-Preferred-Auto;
Default: SFP-Preferred-Auto)
◆ Autonegotiation – Shows if auto-negotiation is enabled or disabled.
◆ Oper Speed Duplex – Shows the current speed and duplex mode.
◆ Oper Flow Control – Shows if flow control is enabled or disabled.
◆ MTU Size – The maximum transfer unit (MTU) allowed for layer 2
packets crossing a Gigabit or 10 Gigabit Ethernet port or trunk.
W EB I NTERFACE
To display port connection parameters:
1. Click Interface, Port, General.
2. Select Show Information from the Action List.
Figure 32: Displaying Port Information
C ONFIGURING P ORT
M IRRORING
Use the Interface > Port > Mirror page to mirror traffic from any source
port to a target port for real-time analysis. You can then attach a logic
analyzer or RMON probe to the target port and study the traffic crossing
the source port in a completely unobtrusive manner.
Figure 33: Configuring Local Port Mirroring
CLI R EFERENCES
◆ "Local Port Mirroring Commands" on page 1029
Source
port(s) Single
target
port