LevelOne GTL-2691 - Manual (Page 768)

C HAPTER 24 | System Management Commands
Device Designation
– 768 –
hostname This command specifies or modifies the host name for this device. Use the
no form to restore the default host name.
S YNTAX
hostname name
no hostname
name - The name of this host. (Maximum length: 255 characters)
D EFAULT S ETTING
None
C OMMAND M ODE
Global Configuration
E XAMPLE
Console(config)#hostname RD#1
Console(config)#
switch all renumber This command resets the switch unit identification numbers in the stack.
All stack members are numbered sequentially starting from the top unit for
a non-loop stack, or starting from the Master unit for a looped stack.
S YNTAX
switch all renumber
D EFAULT S ETTING
◆ For non-loop stacking, the top unit is unit 1.
◆ For loop stacking, the master unit is unit 1.
C OMMAND M ODE
Privileged Exec
C OMMAND M ODE
The system will restart after renumbering is completed.
E XAMPLE
This example shows how to renumber all units.
Console#switch all renumber
Console#