LevelOne GTL-2691 - Manual (Page 1239)

C HAPTER 42 | Multicast Filtering Commands
MVR for IPv4
– 1239 –
show mvr
associate d -profile
This command shows the profiles bound the specified domain.
S YNTAX
show mvr [domain domain-id] associated-profile
domain-id - An independent multicast domain. (Range: 1-5)
D EFAULT S ETTING
Displays profiles bound to all MVR domains.
C OMMAND M ODE
Privileged Exec
E XAMPLE
The following displays the profiles bound to domain 1:
Console#show mvr domain 1 associated-profile
Domain ID : 1
MVR Profile Name Start IP Addr. End IP Addr.
-------------------- --------------- ---------------
rd 228.1.23.1 228.1.23.10
testing 228.2.23.1 228.2.23.10
Console#
show mvr interface This command shows MVR configuration settings for interfaces attached to
the MVR VLAN.
S YNTAX
show mvr [domain domain-id] interface
domain-id - An independent multicast domain. (Range: 1-5)
D EFAULT S ETTING
Displays configuration settings for all attached interfaces.
C OMMAND M ODE
Privileged Exec
E XAMPLE
The following displays information about the interfaces attached to the
MVR VLAN in domain 1:
Console#show mvr domain 1 interface
MVR Domain : 1
Port Type Status Immediate Static Group Address
-------- -------- ------------------- --------- -------------------------
Eth 1/ 2 Receiver Inactive/Discarding Disabled
Eth 1/ 3 Source Inactive/Down
Eth 1/ 1 Receiver Active/Up Disabled 225.0.0.1(VLAN1)
225.0.0.9(VLAN3)
Eth 1/ 4 Receiver Active/Down Disabled