LevelOne GTL-2691 - Manual (Page 851)

C HAPTER 26 | Remote Monitoring Commands
– 851 –
E XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#rmon collection history 21 buckets 24 interval 60 owner
mike
Console(config-if)#
rmon collection
rmon1
This command enables the collection of statistics on a physical interface.
Use the no form to disable statistics collection.
S YNTAX
rmon collection rmon1 controlEntry index [owner name]
no rmon collection rmon1 controlEntry index
index – Index to this entry. (Range: 1-65535)
name – Name of the person who created this entry.
(Range: 1-127 characters)
D EFAULT S ETTING
Enabled
C OMMAND M ODE
Interface Configuration (Ethernet)
C OMMAND U SAGE
◆ By default, each index number equates to a port on the switch, but can
be changed to any number not currently in use.
◆ If statistics collection is already enabled on an interface, the entry must
be deleted before any changes can be made with this command.
◆ The information collected for each entry includes:
input octets, packets, broadcast packets, multicast packets, undersize
packets, oversize packets, fragments, jabbers, CRC alignment errors,
collisions, drop events, and packets of specified lengths
E XAMPLE
Console(config)#interface ethernet 1/1
Console(config-if)#rmon collection rmon1 controlEntry 1 owner mike
Console(config-if)#