LevelOne GTL-2691 - Manual (Page 192)

C HAPTER 5 | Interface Configuration
Traffic Segmentation
– 192 –
■
Blocking – Blocks traffic between uplink ports assigned to different
sessions.
■
Forwarding – Forwards traffic between uplink ports assigned to
different sessions.
W EB I NTERFACE
To enable traffic segmentation:
1. Click Interface, Traffic Segmentation.
2. Select Configure Global from the Step list.
3. Mark the Status check box, and set the required uplink-to-uplink mode.
4. Click Apply.
Figure 56: Enabling Traffic Segmentation