LevelOne GTL-2691 - Manual (Page 149)

C HAPTER 4 | Basic Management Tasks
Setting the System Clock
– 149 –
To show the list of configured NTP time servers:
1.
Click System, then Time.
2.
Select Configure Time Server from the Step list.
3.
Select Show NTP Server from the Action list.
Figure 17: Showing the NTP Time Server List
S PECIFYING NTP A UTHENTICATION K EYS
Use the System > Time (Configure Time Server – Add NTP Authentication
Key) page to add an entry to the authentication key list.
CLI R EFERENCES
◆ "ntp authentication-key" on page 812
P ARAMETERS
The following parameters are displayed:
◆ Authentication Key – Specifies the number of the key in the NTP
Authentication Key List to use for authentication with a configured
server. NTP authentication is optional. When enabled on the System >
Time (Configure General) page, you must also configure at least one
key on this page. Up to 255 keys can be configured on the switch.
(Range: 1-65535)
◆ Key Context – An MD5 authentication key string. The key string can
be up to 32 case-sensitive printable ASCII characters (no spaces).
NTP authentication key numbers and values must match on both the
server and client.
W EB I NTERFACE
To add an entry to NTP authentication key list:
1.
Click System, then Time.
2. Select Configure Time Server from the Step list.
3. Select Add NTP Authentication Key from the Action list.
4. Enter the index number and MD5 authentication key string.
5. Click Apply.