Revision, Spanning-tree bpdu- filter, Revision 1072 spanning-tree bpdu-filter – LevelOne GTL-2691 User Manual
Page 1072: Spanning-tree bpdu-filter, Revision (1072)
C
HAPTER
37
| Spanning Tree Commands
– 1072 –
E
XAMPLE
Console(config-mstp)#name R&D
Console(config-mstp)#
R
ELATED
C
OMMANDS
revision
This command configures the revision number for this multiple spanning
tree configuration of this switch. Use the no form to restore the default.
S
YNTAX
revision number
number - Revision number of the spanning tree. (Range: 0-65535)
D
EFAULT
S
ETTING
0
C
OMMAND
M
ODE
MST Configuration
C
OMMAND
U
SAGE
The MST region name (
) and revision number are used to
designate a unique MST region. A bridge (i.e., spanning-tree compliant
device such as this switch) can only belong to one MST region. And all
bridges in the same region must be configured with the same MST
instances.
E
XAMPLE
Console(config-mstp)#revision 1
Console(config-mstp)#
R
ELATED
C
OMMANDS
spanning-tree bpdu-
filter
This command filters all BPDUs received on an edge port. Use the no form
to disable this feature.
S
YNTAX
[no] spanning-tree bpdu-filter
D
EFAULT
S
ETTING
Disabled
C
OMMAND
M
ODE
Interface Configuration (Ethernet, Port Channel)