LevelOne GTL-2691 - Manual (Page 1013)

C HAPTER 31 | Interface Commands
Interface Configuration
– 1013 –
show interfaces
transceiver
This command displays identifying information for the specified transceiver,
as well as the temperature, voltage, bias current, transmit power, and
receive power.
S YNTAX
show interfaces transceiver [interface]
interface
ethernet unit/port
unit - Stack unit. (Range: 1-8)
port - Port number. (Range: 21-26)
D EFAULT S ETTING
Shows all SFP interfaces.
C OMMAND M ODE
Privileged Exec
C OMMAND U SAGE
The switch can display diagnostic information for SFP modules which
support the SFF-8472 Specification for Diagnostic Monitoring Interface for
Optical Transceivers. This information allows administrators to remotely
diagnose problems with optical devices. Example
Console#show interfaces transceiver ethernet 1/24
Information of Eth 1/24
Connector Type : LC
Fiber Type : Single Mode (SM)
Eth Compliance Codes : 1000BASE-LX
Tx Central Wavelength : 1310 nm
Baud Rate : 1300 MBd
Vendor OUI : 00-00-00
Vendor Name : DELTA
Vendor PN : LCP-1250B4QDRT
Vendor Rev : 000
Vendor SN : 0000070904100004
Date Code : 07-03-02
Temperature : 56 degrees C
Vcc : 3.33 V
Bias Current : 25.34 mA
TX Power : 270 uW
RX Power : 0 uW
Console#show interfaces transceiver e 1/26
Information of Eth 1/26
Connector Type : LC
Fiber Type : [0x00]
10G Eth Compliance : 10GBASE-LR, 10GBASE-LW
Tx Central Wavelength : 26150 nm
Baud Rate : 9900 MBd
Vendor OUI : 00-09-A6
Vendor Name : BOOKHAM-TECHNOL-
Vendor PN : IGF17311
Vendor Rev : B2
Vendor SN :
Date Code : 240-240-240
Temperature : 44 degrees C