LevelOne GTL-2691 - Manual (Page 829)

C HAPTER 25 | SNMP Commands
General SNMP Commands
– 829 –
General SNMP Commands
snmp-server This command enables the SNMPv3 engine and services for all
management clients (i.e., versions 1, 2c, 3). Use the no form to disable the
server.
S YNTAX
[no] snmp-server
D EFAULT S ETTING
Enabled
C OMMAND M ODE
Global Configuration
E XAMPLE
Console(config)#snmp-server
Console(config)#
snmp-server
community
This command defines community access strings used to authorize
management access by clients using SNMP v1 or v2c. Use the no form to
remove the specified community string.
S YNTAX
snmp-server community string [ro | rw]
no snmp-server community string
string - Community string that acts like a password and permits
access to the SNMP protocol. (Maximum length: 32 characters, case
sensitive; Maximum number of strings: 5)
ro - Specifies read-only access. Authorized management stations
are only able to retrieve MIB objects.
rw - Specifies read/write access. Authorized management stations
are able to both retrieve and modify MIB objects.
D EFAULT S ETTING
◆ public - Read-only access. Authorized management stations are only
able to retrieve MIB objects.
◆ private - Read/write access. Authorized management stations are able
to both retrieve and modify MIB objects.
C OMMAND M ODE
Global Configuration