Mvr robustness- value, Mvr robustness-value – LevelOne GTL-2691 User Manual
Page 1232
C
HAPTER
42
| Multicast Filtering Commands
MVR for IPv4
– 1232 –
E
XAMPLE
The following example enable MVR proxy switching.
Console(config)#mvr proxy-switching
Console(config)#
R
ELATED
C
OMMANDS
mvr proxy-query-interval (1230)
mvr robustness-
value
This command configures the expected packet loss, and thereby the
number of times to generate report and group-specific queries. Use the no
form to restore the default setting.
S
YNTAX
mvr robustness-value value
no mvr robustness-value
value - The robustness used for all interfaces. (Range: 1-255)
D
EFAULT
S
ETTING
1
C
OMMAND
M
ODE
Global Configuration
C
OMMAND
U
SAGE
◆
This command is used to set the number of times report messages are
sent upstream when changes are learned about downstream groups,
and the number of times group-specific queries are sent to downstream
receiver ports.
◆
This command only takes effect when MVR proxy switching is enabled.
E
XAMPLE
Console(config)#mvr robustness-value 5
Console(config)#
R
ELATED
C
OMMANDS