Show startup-config – LevelOne GTL-2691 User Manual
Page 772
C
HAPTER
24
| System Management Commands
System Status
– 772 –
!
!
!
snmp-server community public ro
snmp-server community private rw
!
snmp-server enable traps authentication
!
username admin access-level 15
username admin password 7 21232f297a57a5a743894a0e4a801fc3
username guest access-level 0
username guest password 7 084e0343a0486ff05530df6c705c8bb4
enable password level 15 7 1b3231655cebb7a1f783eddf27d254ca
!
vlan database
vlan 1 name DefaultVlan media ethernet state active
!
spanning-tree mst configuration
!
interface ethernet 1/1
switchport broadcast packet-rate 500
switchport allowed vlan add 1 untagged
switchport native vlan 1
.
.
.
!
interface vlan 1
ip address dhcp
!
no ip igmp snooping proxy-reporting
!
interface vlan 1
!
line console
!
line vty
!
end
!
Console#show running-config interface ethernet 1/1
interface ethernet 1/1
switchport allowed vlan add 1 untagged
switchport native vlan 1
queue weight 1 2 4 6 8 10 12 14
!
Console#
R
ELATED
C
OMMANDS
show startup-config
This command displays the configuration file stored in non-volatile memory
that is used to start up the system.
C
OMMAND
M
ODE
Privileged Exec
C
OMMAND
U
SAGE
◆
Use this command in conjunction with the show running-config
command to compare the information in running memory to the
information stored in non-volatile memory.