LevelOne GTL-2691 - Manual (Page 1173)

C HAPTER 41 | Quality of Service Commands
– 1173 –
This example creates a class map call “rd-class#2,” and sets it to match
packets marked for IP Precedence service value 5.
Console(config)#class-map rd-class#2 match-any
Console(config-cmap)#match ip precedence 5
Console(config-cmap)#
This example creates a class map call “rd-class#3,” and sets it to match
packets marked for VLAN 1.
Console(config)#class-map rd-class#3 match-any
Console(config-cmap)#match vlan 1
Console(config-cmap)#
rename This command redefines the name of a class map or policy map.
S YNTAX
rename map-name
map-name - Name of the class map or policy map.
(Range: 1-32 characters)
C OMMAND M ODE
Class Map Configuration
Policy Map Configuration
E XAMPLE
Console(config)#class-map rd-class#1
Console(config-cmap)#rename rd-class#9
Console(config-cmap)#
policy-map This command creates a policy map that can be attached to multiple
interfaces, and enters Policy Map configuration mode. Use the no form to
delete a policy map.
S YNTAX
[no] policy-map policy-map-name
policy-map-name - Name of the policy map.
(Range: 1-32 characters)
D EFAULT S ETTING
None
C OMMAND M ODE
Global Configuration